Every feature of FixVault Board Viewer Pro
Every feature below is in the released version; nothing is announced ahead of time.
Board viewer
The whole board on screen, read directly on your computer: the file is sent nowhere.
Eight file types
.pcb and .xzz (XZZ), .brd and .brd2 (OpenBoardView), .bvr, .cad, .fz (ASUS) and .kicad_pcb.
Both sides
Top side, bottom side or both at once, with the mini-map to find your way on large boards.
Instant search
Component or net, with exact, “starts with” or “contains” search. Shortcut Ctrl+F.
Every pin in detail
Net, voltage, side, component and position, with the list of the other pads on the same net.
Display your way
A clear rendering on every machine, set up the way you work.
2D or 3D
3D relief if the graphics card allows it, otherwise smooth 2D everywhere. The software switches by itself when needed.
Layers to choose from
Copper traces, vias, silkscreen, net links, part names, pad numbers, ground components hidden.
Several boards in tabs
Open several files at once and switch from one to the other in a click.
Annotations
Rectangle, ellipse, freehand and distance measurement on the board; arrows and boxes on your PDF or image schematics.
Power and faults
Worked out from the open board with repair rules: no AI, no connection needed.
Power rails
Battery, main bus, logic, analog, RF: every rail sorted, with its source and where to probe if it is dead.
Power-up sequence
Rails sorted by phase, from always-on to peripherals, plus the failure points that bring down the most of them.
Guided diagnosis
No power, no charge, short on a rail or missing rail: ranked hypotheses, suspect components, measurements to take.
Power-up simulator
Mark a rail as dead: the point where power-up stops and the source to check are shown.
Diagnostic assistant
Ask your question as you would a colleague: the assistant answers from the components and nets of the open board.
Questions in plain words
“Identify the main PMIC”, “Diagnose a charging fault”: the assistant sticks to the references on the board.
Highlighted circuits
With your FixVault account, the assistant shows on the board the components and nets it talks about, step by step.
Photo and voice
Attach the microscope image to your question, dictate with the microphone and have answers read aloud.
No subscription: your keys
Anthropic, OpenAI, Gemini or Mistral: your keys stay encrypted on your computer, with automatic switching from one to the next.
At the bench
The multimeter and the microscope work with the board on screen.
Live multimeter
Readings over Bluetooth in the installed app, or from the measurement file in FlexBV format.
Cameras and microscope
One window per camera, named as you like: photos and videos saved on the computer, image sent to the assistant.
Step-by-step diagnosis
With FixVault: describe the fault, a measurement protocol is built, the multimeter fills in each reading and the board shows where to probe.
Connected to FixVault
With the FixVault management software, the board diagnosis joins the rest of the repair.
The ticket as context
Customer, fault, photos and Forensix diagnostics of the ticket loaded as context for the assistant, with the list of your open tickets.
Captures attached to the ticket
The microscope photo goes to the ticket in one click, from the camera window.
Saved diagnoses
Name, status, linked ticket: pick a session up later, or share it with other workshops after review.
The real software, exactly as you will get it
FixVault Board Viewer Pro vs Paid PCB viewers
PCB viewers on the market are expensive, priced per workstation, and usually without diagnostic AI. Board Viewer Pro aims for the same level of visualisation, with a diagnostic assistant on top.
Price
Board Viewer Pro
€19.90/month or €190/year (-20 %)
Paid PCB viewers
Paid viewer ~130 USD to 200 USD per workstation
Nets, components and schematics view
Board Viewer Pro
Yes
Paid PCB viewers
Yes
Reads .pcb and .brd
Board Viewer Pro
Yes
Paid PCB viewers
Yes
Online access (web/PWA, no installation)
Board Viewer Pro
Yes, at bv.fixvault.fr
Paid PCB viewers
No, desktop only
Micro-soldering diagnostic AI
Board Viewer Pro
Yes, fault finding
Paid PCB viewers
No
Automatic power tree
Board Viewer Pro
Yes, identifies the PMIC
Paid PCB viewers
Manual
Generated test procedures
Board Viewer Pro
Yes, by the AI
Paid PCB viewers
No
Built into the repair ERP
Board Viewer Pro
Yes
Paid PCB viewers
No, standalone tool
| Criterion | Board Viewer Pro | Paid PCB viewers |
|---|---|---|
| Price | €19.90/month or €190/year (-20 %) | Paid viewer ~130 USD to 200 USD per workstation |
| Nets, components and schematics view | Yes | Yes |
| Reads .pcb and .brd | Yes | Yes |
| Online access (web/PWA, no installation) | Yes, at bv.fixvault.fr | No, desktop only |
| Micro-soldering diagnostic AI | Yes, fault finding | No |
| Automatic power tree | Yes, identifies the PMIC | Manual |
| Generated test procedures | Yes, by the AI | No |
| Built into the repair ERP | Yes | No, standalone tool |
Competitor prices are indicative, publicly listed and subject to change. This comparison is provided in good faith to show value for money.

Ready to try FixVault Board Viewer Pro?
Instant licence, no commitment, cancel online. Or included in your FixVault subscription.
Monthly subscription, no commitment, cancel at any time. Or pay yearly and save 20 %.
Included in FixVault: free trial
